This throttle lever assembly was quite a little puzzle. When Jim Kreider first gave me the drawings I was a bit puzzled. "There are enough parts here for two throttles", I thought. Then after looking at some photos and studying the drawings for a while I finally started to get my brain wrapped around it. In this photo most of the bits for the main body "casting" are fitted together. Once it was fitted together it was dis assembled, fluxed and silver soldered. {BACK} {HOME} {A&C SHOPS} {BERKSHIRE} {AMERICANS} {No. 9} {CARS} {JEWELRY} {CONTACT} copyright © 2004-2006, Jack Bodenmann, all rights reserved.